[N198] ☆ 4台セット ☆ Cisco Catalyst 2960-Lシリーズ　WS-C2960L-16TS-LL V02 ☆ Version 15.2(6)E1 ☆

Осталось:

Рейтинг продавца

13971

Продавец

mor********
Все лоты продавца

Start time

19 мая 05:04 (Tokyo)

Окончание

21 мая 12:27 (Tokyo)

Ставки

Количество

Налог

10%

Состояние

Minor scratches or stains

Доставка по Японии

Нет бесплатной доставки

Номер лота

x1230429408

Автопродление торгов

Yes

Область продажи

愛知県半田市

Войдите

чтобы делать ставки

Появились вопросы по товару?

Сколько это будет стоить?

Описание

出品商品	メーカー：Cisco　商品名 / 型番：Catalyst 2960-Lシリーズ　WS-C2960L-16TS-LL V02 付属品：なし程度：中古品になります。キズ・スリキズがあります。状態：通電～コンソール出力までの確認となります。コンソール出力結果は次項を参照ください。 ※ 4台セットの価格となります。
お取引について	出品物は写真に写っている物のみです。取り引きはノークレーム・ノーリターンでお願いします。お使いのパソコンの使用状況によっては実物と色が異なる場合があります。神経質な方は入札をお控え下さい。
お支払い金額	お支払い金額は、落札金額＋消費税＋送料(税込)をお支払いください。 ※当店はオークションストアの為、落札金額に消費税が別途必要になります。
発送方法	発送方法は、佐川急便の飛脚宅配便(元払い)か、クロネコヤマトの宅急便(元払い)になります。送料(税込)は以下になります。・佐川急便　　北海道　　　　　　　　　　　　2200円　　北東北・九州　　　　　　　　　1900円　　南東北・中国・四国　　　　　　1800円　　関東・信越・北陸・中部・関西　1700円　※沖縄・その他離島の場合の送料は入札の前にお問い合わせください。・クロネコヤマト　　北海道　　　　　　　　　　　　2400円　　北東北・九州　　　　　　　　　2000円　　南東北・中国・四国　　　　　　1900円　　関東・信越・北陸・中部・関西　1800円　　沖縄　　　　　　　　　　　　　3800円
発送について	入金確認が出来ましたら2～3営業日後に発送します。商品を発送しましたらご連絡致します。

コンソール

＊＊＊＊＊1台目＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊

General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
Board H/W SKU Id is (2)
DDR3 Training Sequence - Ver TIP-1.27.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
DDR3 Training Sequence - Start scrubbing
DDR3 Training Sequence - End scrubbing
BootROM: Image checksum verification PASSED

Board SKU ID is (2)
FPU initialized to Run Fast Mode.
FPGA: 1.5
DRAM Size: 512 MB
Xmodem file system is available.
USB EHCI 1.00
Using driver version 1 for media type 3
yaffs[9]: Initialization complete.

yaffs[10]: Initialization complete.

yaffs[11]: Initialization complete.

Base ethernet MAC Address: 00:b6:70:f3:b6:00
The password-recovery mechanism is enabled.

*** The system will autoboot in 5 seconds ***
Send break character to prevent autobooting.
...........
config file not found..
Loading "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin"...Verifying image flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin............................................................................................................................................................................................................................................
Image passed digital signature verification

翡eneral initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
Board H/W SKU Id is (2)
DDR3 Training Sequence - Ver TIP-1.27.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
DDR3 Training Sequence - Start scrubbing
DDR3 Training Sequence - End scrubbing
BootROM: Image checksum verification PASSED

Board SKU ID is (2)
FPU initialized to Run Fast Mode.
FPGA: 1.5
DRAM Size: 512 MB
Xmodem file system is available.
USB EHCI 1.00
Using driver version 1 for media type 3
yaffs[9]: Initialization complete.

yaffs[10]: Initialization complete.

yaffs[11]: Initialization complete.

Base ethernet MAC Address: 00:45:1d:fa:68:00
The password-recovery mechanism is enabled.

*** The system will autoboot in 5 seconds ***
Send break character to prevent autobooting.

....................
config file not found..
Loading "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin"...Verifying image flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin............................................................................................................................................................................................................................................
Image passed digital signature verification
$$$$$$$$$$$
File "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin" uncompressed and installed, entry point: 0x3000
executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(6)E1, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 06-Mar-18 06:49 by prod_rel_team
Initializing flash...
Using driver version 1 for media type 3
yaffs[8]: Initialization complete.

yaffs[9]: Initialization complete.

yaffs[10]: Initialization complete.

...done Initializing flash.

Checking for MCU firmware upgrade..
MCU firmware upgrade not needed (v1.6.1.iap)

Checking for Bootloader upgrade..

Boot Loader upgrade not needed(v) DB Recovery 4

INIT: Pp init completed.

INIT: ASIC 0 phases init completed.

INIT: phases init completed.
INIT: Setting Policer MRU Failed
INIT: features init completed.

POST: ACT2 Authentication : Begin
POST: ACT2 Authentication : End, Status Passed
POST: Thermal Tests : Begin
POST: Thermal Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed

Initializing Device Manager......done
Initializing OBFL Module......done

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960L-16TS-LL (Marvell PJ4B (584) v7 (Rev 2)) processor (revision F0) with 524288K bytes of memory.
Processor board ID FCW2221A1T2
Last reset from Reload
1 Virtual Ethernet interface
18 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:45:1D:FA:68:00
Motherboard assembly number : U58O342T04
Power supply part number : 341-100559-01
Motherboard serial number : FOC22195HXY
Power supply serial number : LIT22155NXL
Model revision number : F0
Motherboard revision number : 20
Model number : WS-C2960L-16TS-LL
System serial number : FCW2221A1T2
Top Assembly Part Number : 74-105853-02
Top Assembly Revision Number : D0
Version ID : V02
CLEI Code Number : CMMWG00ARB
Hardware Board Revision Number : 0x01
No Day0 Config File Found

--- System Configuration Dialog ---

Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enable secret
If you choose not to enter the intial configuration dialog, or if you exit setup without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0
----------------------------------
Would you like to enter the initial configuration dialog? [yes/no]: no

Would you like to terminate autoinstall? [yes]:

Press RETURN to get started!

Switch>
Switch>en
Switch#show version
Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(6)E1, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 06-Mar-18 06:49 by prod_rel_team

ROM: Bootstrap program is C2960L boot loader
BOOTLDR: C2960L Boot Loader (C2960L-HBOOT-M) Version 15.2(5r)E3, RELEASE SOFTWARE (fc2)

Switch uptime is 1 minute
System returned to ROM by power-on
System restarted at 04:17:40 UTC Tue May 19 2026
System image file is "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin"
Last reload reason: power-on

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960L-16TS-LL (Marvell PJ4B (584) v7 (Rev 2)) processor (revision F0) with 524288K bytes of memory.
Processor board ID FCW2221A1T2
Last reset from Reload
1 Virtual Ethernet interface
18 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:45:1D:FA:68:00
Motherboard assembly number : U58O342T04
Power supply part number : 341-100559-01
Motherboard serial number : FOC22195HXY
Power supply serial number : LIT22155NXL
Model revision number : F0
Motherboard revision number : 20
Model number : WS-C2960L-16TS-LL
System serial number : FCW2221A1T2
Top Assembly Part Number : 74-105853-02
Top Assembly Revision Number : D0
Version ID : V02
CLEI Code Number : CMMWG00ARB
Hardware Board Revision Number : 0x01

Configuration register is 0xF

Switch#

＊＊＊＊＊2台目＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊

General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
Board H/W SKU Id is (2)
DDR3 Training Sequence - Ver TIP-1.27.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
DDR3 Training Sequence - Start scrubbing
DDR3 Training Sequence - End scrubbing
BootROM: Image checksum verification PASSED

Board SKU ID is (2)
FPU initialized to Run Fast Mode.
FPGA: 1.5
DRAM Size: 512 MB
Xmodem file system is available.
USB EHCI 1.00
Using driver version 1 for media type 3
yaffs[9]: Initialization complete.

yaffs[10]: Initialization complete.

yaffs[11]: Initialization complete.

Base ethernet MAC Address: 00:b6:70:f3:b6:00
The password-recovery mechanism is enabled.

*** The system will autoboot in 5 seconds ***
Send break character to prevent autobooting.

....................
config file not found..
Loading "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin"...Verifying image flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin............................................................................................................................................................................................................................................
Image passed digital signature verification
$$$$$$$$$$$
File "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin" uncompressed and installed, entry point: 0x3000
executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(6)E1, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 06-Mar-18 06:49 by prod_rel_team
Initializing flash...
Using driver version 1 for media type 3
yaffs[8]: Initialization complete.

yaffs[9]: Initialization complete.

yaffs[10]: Initialization complete.

...done Initializing flash.

Checking for MCU firmware upgrade..
MCU firmware upgrade not needed (v1.6.1.iap)

Checking for Bootloader upgrade..

Boot Loader upgrade not needed(v) DB Recovery 4

INIT: Pp init completed.

INIT: ASIC 0 phases init completed.

INIT: phases init completed.
INIT: Setting Policer MRU Failed
INIT: features init completed.

POST: ACT2 Authentication : Begin
POST: ACT2 Authentication : End, Status Passed
POST: Thermal Tests : Begin
POST: Thermal Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed

Initializing Device Manager......done
Initializing OBFL Module......done

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960L-16TS-LL (Marvell PJ4B (584) v7 (Rev 2)) processor (revision F0) with 524288K bytes of memory.
Processor board ID FCW2222A2W7
Last reset from Reload
1 Virtual Ethernet interface
18 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:B6:70:F3:B6:00
Motherboard assembly number : U58O342T04
Power supply part number : 341-100559-01
Motherboard serial number : FOC22215U2V
Power supply serial number : DCG221119GD
Model revision number : F0
Motherboard revision number : 20
Model number : WS-C2960L-16TS-LL
System serial number : FCW2222A2W7
Top Assembly Part Number : 74-105853-02
Top Assembly Revision Number : D0
Version ID : V02
CLEI Code Number : CMMWG00ARB
Hardware Board Revision Number : 0x01
No Day0 Config File Found

--- System Configuration Dialog ---

Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enable secret
If you choose not to enter the intial configuration dialog, or if you exit setup without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0
----------------------------------
Would you like to enter the initial configuration dialog? [yes/no]: no

Would you like to terminate autoinstall? [yes]:

Press RETURN to get started!

Switch>
Switch>en
Switch#show version
Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(6)E1, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 06-Mar-18 06:49 by prod_rel_team

ROM: Bootstrap program is C2960L boot loader
BOOTLDR: C2960L Boot Loader (C2960L-HBOOT-M) Version 15.2(5r)E3, RELEASE SOFTWARE (fc2)

Switch uptime is 0 minutes
System returned to ROM by power-on
System restarted at 00:00:27 UTC Sat Jan 1 2000
System image file is "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin"
Last reload reason: power-on

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960L-16TS-LL (Marvell PJ4B (584) v7 (Rev 2)) processor (revision F0) with 524288K bytes of memory.
Processor board ID FCW2222A2W7
Last reset from Reload
1 Virtual Ethernet interface
18 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:B6:70:F3:B6:00
Motherboard assembly number : U58O342T04
Power supply part number : 341-100559-01
Motherboard serial number : FOC22215U2V
Power supply serial number : DCG221119GD
Model revision number : F0
Motherboard revision number : 20
Model number : WS-C2960L-16TS-LL
System serial number : FCW2222A2W7
Top Assembly Part Number : 74-105853-02
Top Assembly Revision Number : D0
Version ID : V02
CLEI Code Number : CMMWG00ARB
Hardware Board Revision Number : 0x01

Configuration register is 0xF

Switch#

＊＊＊＊＊3台目＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
Board H/W SKU Id is (2)
DDR3 Training Sequence - Ver TIP-1.27.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
DDR3 Training Sequence - Start scrubbing
DDR3 Training Sequence - End scrubbing
BootROM: Image checksum verification PASSED

Board SKU ID is (2)
FPU initialized to Run Fast Mode.
FPGA: 1.5
DRAM Size: 512 MB
Xmodem file system is available.
USB EHCI 1.00
Using driver version 1 for media type 3
yaffs[9]: Initialization complete.

yaffs[10]: Initialization complete.

yaffs[11]: Initialization complete.

Base ethernet MAC Address: 00:b6:70:d6:60:00
The password-recovery mechanism is enabled.

*** The system will autoboot in 5 seconds ***
Send break character to prevent autobooting.

....................
config file not found..
Loading "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin"...Verifying image flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin............................................................................................................................................................................................................................................
Image passed digital signature verification
$$$$$$$$$$$
File "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin" uncompressed and installed, entry point: 0x3000
executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(6)E1, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 06-Mar-18 06:49 by prod_rel_team
Initializing flash...
Using driver version 1 for media type 3
yaffs[8]: Initialization complete.

yaffs[9]: Initialization complete.

yaffs[10]: Initialization complete.

...done Initializing flash.

Checking for MCU firmware upgrade..
MCU firmware upgrade not needed (v1.6.1.iap)

Checking for Bootloader upgrade..

Boot Loader upgrade not needed(v) DB Recovery 4

INIT: Pp init completed.

INIT: ASIC 0 phases init completed.

INIT: phases init completed.
INIT: Setting Policer MRU Failed
INIT: features init completed.

POST: ACT2 Authentication : Begin
POST: ACT2 Authentication : End, Status Passed
POST: Thermal Tests : Begin
POST: Thermal Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed

Initializing Device Manager......done
Initializing OBFL Module......done

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960L-16TS-LL (Marvell PJ4B (584) v7 (Rev 2)) processor (revision F0) with 524288K bytes of memory.
Processor board ID FCW2222A12Z
Last reset from Reload
1 Virtual Ethernet interface
18 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:B6:70:D6:60:00
Motherboard assembly number : U58O342T04
Power supply part number : 341-100559-01
Motherboard serial number : FOC22205MF7
Power supply serial number : LIT22155RA7
Model revision number : F0
Motherboard revision number : 20
Model number : WS-C2960L-16TS-LL
System serial number : FCW2222A12Z
Top Assembly Part Number : 74-105853-02
Top Assembly Revision Number : D0
Version ID : V02
CLEI Code Number : CMMWG00ARB
Hardware Board Revision Number : 0x01
No Day0 Config File Found

--- System Configuration Dialog ---

Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enable secret
If you choose not to enter the intial configuration dialog, or if you exit setup without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0
----------------------------------
Would you like to enter the initial configuration dialog? [yes/no]: no

Would you like to terminate autoinstall? [yes]:

Press RETURN to get started!

Switch>
Switch>en
Switch#show version
Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(6)E1, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 06-Mar-18 06:49 by prod_rel_team

ROM: Bootstrap program is C2960L boot loader
BOOTLDR: C2960L Boot Loader (C2960L-HBOOT-M) Version 15.2(5r)E3, RELEASE SOFTWARE (fc2)

Switch uptime is 0 minutes
System returned to ROM by power-on
System restarted at 04:20:58 UTC Tue May 19 2026
System image file is "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin"
Last reload reason: power-on

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960L-16TS-LL (Marvell PJ4B (584) v7 (Rev 2)) processor (revision F0) with 524288K bytes of memory.
Processor board ID FCW2222A12Z
Last reset from Reload
1 Virtual Ethernet interface
18 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:B6:70:D6:60:00
Motherboard assembly number : U58O342T04
Power supply part number : 341-100559-01
Motherboard serial number : FOC22205MF7
Power supply serial number : LIT22155RA7
Model revision number : F0
Motherboard revision number : 20
Model number : WS-C2960L-16TS-LL
System serial number : FCW2222A12Z
Top Assembly Part Number : 74-105853-02
Top Assembly Revision Number : D0
Version ID : V02
CLEI Code Number : CMMWG00ARB
Hardware Board Revision Number : 0x01

Configuration register is 0xF

Switch#

＊＊＊＊＊4台目＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊

General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
Board H/W SKU Id is (2)
DDR3 Training Sequence - Ver TIP-1.27.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
DDR3 Training Sequence - Start scrubbing
DDR3 Training Sequence - End scrubbing
BootROM: Image checksum verification PASSED

Board SKU ID is (2)
FPU initialized to Run Fast Mode.
FPGA: 1.5
DRAM Size: 512 MB
Xmodem file system is available.
USB EHCI 1.00
Using driver version 1 for media type 3
yaffs[9]: Initialization complete.

yaffs[10]: Initialization complete.

yaffs[11]: Initialization complete.

Base ethernet MAC Address: 00:b6:70:df:a3:80
The password-recovery mechanism is enabled.

*** The system will autoboot in 5 seconds ***
Send break character to prevent autobooting.

....................
config file not found..
Loading "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin"...Verifying image flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin............................................................................................................................................................................................................................................
Image passed digital signature verification
$$$$$$$$$$$
File "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin" uncompressed and installed, entry point: 0x3000
executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(6)E1, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 06-Mar-18 06:49 by prod_rel_team
Initializing flash...
Using driver version 1 for media type 3
yaffs[8]: Initialization complete.

yaffs[9]: Initialization complete.

yaffs[10]: Initialization complete.

...done Initializing flash.

Checking for MCU firmware upgrade..
MCU firmware upgrade not needed (v1.6.1.iap)

Checking for Bootloader upgrade..

Boot Loader upgrade not needed(v) DB Recovery 4

INIT: Pp init completed.

INIT: ASIC 0 phases init completed.

INIT: phases init completed.
INIT: Setting Policer MRU Failed
INIT: features init completed.

POST: ACT2 Authentication : Begin
POST: ACT2 Authentication : End, Status Passed
POST: Thermal Tests : Begin
POST: Thermal Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed

Initializing Device Manager......done
Initializing OBFL Module......done

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960L-16TS-LL (Marvell PJ4B (584) v7 (Rev 2)) processor (revision F0) with 524288K bytes of memory.
Processor board ID FCW2222A2PR
Last reset from Reload
1 Virtual Ethernet interface
18 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:B6:70:DF:A3:80
Motherboard assembly number : U58O342T04
Power supply part number : 341-100559-01
Motherboard serial number : FOC22215U4S
Power supply serial number : DCG22111A1D
Model revision number : F0
Motherboard revision number : 20
Model number : WS-C2960L-16TS-LL
System serial number : FCW2222A2PR
Top Assembly Part Number : 74-105853-02
Top Assembly Revision Number : D0
Version ID : V02
CLEI Code Number : CMMWG00ARB
Hardware Board Revision Number : 0x01
No Day0 Config File Found

--- System Configuration Dialog ---

Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enable secret
If you choose not to enter the intial configuration dialog, or if you exit setup without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0
----------------------------------
Would you like to enter the initial configuration dialog? [yes/no]: no

Would you like to terminate autoinstall? [yes]:

Press RETURN to get started!

Switch>
Switch>en
Switch#show version
Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(6)E1, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 06-Mar-18 06:49 by prod_rel_team

ROM: Bootstrap program is C2960L boot loader
BOOTLDR: C2960L Boot Loader (C2960L-HBOOT-M) Version 15.2(5r)E3, RELEASE SOFTWARE (fc2)

Switch uptime is 0 minutes
System returned to ROM by power-on
System restarted at 04:27:11 UTC Tue May 19 2026
System image file is "flash:c2960l-universalk9-mz.152-6.E1/c2960l-universalk9-mz.152-6.E1.bin"
Last reload reason: power-on

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960L-16TS-LL (Marvell PJ4B (584) v7 (Rev 2)) processor (revision F0) with 524288K bytes of memory.
Processor board ID FCW2222A2PR
Last reset from Reload
1 Virtual Ethernet interface
18 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:B6:70:DF:A3:80
Motherboard assembly number : U58O342T04
Power supply part number : 341-100559-01
Motherboard serial number : FOC22215U4S
Power supply serial number : DCG22111A1D
Model revision number : F0
Motherboard revision number : 20
Model number : WS-C2960L-16TS-LL
System serial number : FCW2222A2PR
Top Assembly Part Number : 74-105853-02
Top Assembly Revision Number : D0
Version ID : V02
CLEI Code Number : CMMWG00ARB
Hardware Board Revision Number : 0x01

Configuration register is 0xF

Switch#

[N198] ☆ 4台セット ☆ Cisco Catalyst 2960-Lシリーズ WS-C2960L-16TS-LL V02 ☆ Version 15.2(6)E1 ☆

Войдите

[N198] ☆ 4台セット ☆ Cisco Catalyst 2960-Lシリーズ　WS-C2960L-16TS-LL V02 ☆ Version 15.2(6)E1 ☆